SAFELY DISCHARGE X CAPACITORS ELECTRONIC DIAGRAM

SAFELY DISCHARGE X CAPACITORS ELECTRONIC DIAGRAM

When the AC voltage is disconnected, CAPZero automatically and safely discharges the X capacitor by closing the circuit through the bleed resistors and directing the energy away from the exposed AC plug. This approach provides engineers with total flexibility in their choice of the X capacitor used to optimize differential- mode EMI filtering without worrying about the effect of the required bleed resistors on system no-load and standby power budget. The innovative design inherently meets international safety standards for all open and short-circuit fault tests, allowing CAPZero to be used before or after the system input fuse. CAPZero is suitable for all AC-DC converters with X capacitors that require very low standby power. It’s offered with 825- or 1,000-V MOSFETs to support a variety of power supply design needs. It is ideal for a wide range of applications, including PCs, servers/workstations, monitors and TVs, printers and notebooks, and appliances requiring EuP Lot 6 compliance and adapters requiring ultra-low no-load consumption. CAPZero devices are available now in an SO-8 package at $0.40 each for 10,000- piece quantities. [www.powerint.com]

Read More..

Signal Conditioning Circuit for KMI 15 x Rotation Speed Sensor

This is a design circuit for modulated current that is provided by the integrated rotational speed sensor KMI 15/x. This current signal must be converted to ground referenced voltage signal, matching the logic levels of the processing unit for digital signal processing. This signal conditioning can be done by using this circuit. This circuit is consists of protective elements to suppress line conducted interference and low pass filter in front of the comparator input. This is the figure of the circuit;

This circuit uses first-order RC low pass filter as signal filter. This circuit is made of C4 and R3 with cut off frequency of 10 kHz. This cut off frequency is used to achieve an optimum absorption of noise.
 

To block negative interference pulses and protect the sensor and electronics against reverse polarity of the supply voltage, this circuit uses the series diode D1. The suppressor diode D2 is used to limit positive interference pulses. Fast negative and positive interference pulses are absorbed by the capacitor C2. To supply the sensor during short supply voltage breakdown because of negative pulses, the electrolytic capacitor C3 stores energy. [Circuit diagram source: Philips Semiconductors Application Note]

Read More..