Bar Mode Lights Sequencer

Can drive up to 15 LEDs or LED-clusters, Selectable Bar-length

This circuit, designed on request, allows up to 15 LED clusters to illuminate in bar-mode sequence. LED sequencing will start at power-on and, after reaching the desired output, all the LEDs turn off and sequence restarts. The number of LEDs or clusters forming the bar can be selected by connecting R7 to the appropriate output pin of IC2 or IC3.

Parts:

R1,R5,R9_________1K 1/4W Resistors
R2______________33K 1/4W Resistor
R3_____________100K 1/2W Trimmer Cermet
R4_______________1M 1/4W Resistor
R6,R10__________10K 1/4W Resistors
R7,R8___________22K 1/4W Resistors
R11______________4K7 1/4W Resistor
R12_____________33R 1/4W Resistor (See Notes)
C1______________10µF 25V Electrolytic Capacitor
C2_____________100nF 63V Polyester Capacitor
C3_____________470µF 25V Electrolytic Capacitor
D1--D14________LEDs (See Notes)
Q1___________2N3819 General-purpose N-Channel FET
Q2,Q3,Q5______BC547 45V 100mA NPN Transistors
Q4____________BC337 45V 800mA NPN Transistor
IC1____________7555 or TS555CN CMos Timer IC
IC2,IC3________4094 8-stage shift-and-store bus register IC

Notes:

• R5 and D1 are optional: they could be of some utility in monitoring the sequence frequency set by means of R3.
• The terminal of R7 bearing an arrow must be connected to the desired output pin of IC2 or IC3 in order to select the number of LEDs or clusters forming the bar.
• For example: if you want to drive seven LEDs or clusters connect R7 to pin#11 of IC2 (Output 8) and the LED or cluster drivers to Outputs 1 to 7 respectively.
• Clusters can be formed by up to 12 LEDs as shown in the circuit diagram, right side. Common cluster types usually range from 5 to 10 LEDs.
• Up to 15 of these cluster driver circuits, each formed by the LEDs, two transistors and three resistors can be built and connected to the progressively numbered outputs of IC2 (the first eight clusters) and IC3 (the remaining clusters).
• If a number of clusters up to 7 is required, IC3 can be omitted.
• Constant output current value for the LEDs can be changed by varying R10.
• The formula is: R = 0.6/I (I expressed in Amperes).
• Wanting to drive only one LED per output instead of a cluster, the above mentioned cluster driver can be substituted by a single transistor, as shown in the circuit formed by D2, Q3, R8 and R9.

Read More..

Marmaled Jam LED Light First Aid Kits LED Lights Mini Massager LED Flashlight

This is not a jam, it is a light: Marmaled jam LED light

However, where is its switches? This is also the mystery of it concealed, as long as you put the bottle upside down, it lit! It is also used as night lights for kids.

The drawback is that it is like a bottle of jam so much. The body of bottle was also marked "non-edible" to avoid eating, but if there are children at home, you must take it out of children can reach.

  

This is not a dolphin toy, it is a light: auto first aid kits LED lights - dolphins

Do not think that it is only a light resembles a dolphin, not only it is the best LED flashlight, it has a breakdown of glass and cut off the seat belt. It is compact applies to any car, which is a multi-purpose vehicle security tools. The most important thing is that it is low-carbon products! Taking the Dynamo never pollute the environment.

The drawback is that it is like a toy so much. Athought it likes a dolphin, but for the security, please put away from children!

Do you think it is just a lamp! it is wrong! It is also a massage: Mini Massager

Summer is the peak period of power outage often happens, so the essential of every household is a flashlight. But how can the ordinary flashlight meet your needs? ! If a LED flashlight can only lighting, then it is failed.

Who would ever have thought that massage is actually also related to led flashlight, yes. Is this the most relaxing flashlight to meet you usually love to massage. This section is also a low-carbon products, environmentalists do not have to worry about batteries pollute the environment.

Read More..

Power Coming Switch Lights Series

Com Wp Content Uploads 2008 01 2 Way Switch Wiring Diagram Jpg.



Way Switch Feed To Switch Alternate Method Standard Receptacle.



Humbuckers 3 Way Toggle Switch With 1 Volume Guitar Wiring Diagram.



Wiring This Is The Correct Wiring For 3 Way Selector.



Is Basically A 3 Way Circuit With A 4 Way Switch Added Between The 2.



Video Animation Dc Three Way Switch Showing Current Flow By Russell.



Option 2 Power To Switch To Switch To Light To Light.



Toyota Fj Cruiser Brake Switch Wiring Diagram Circuit Schematic.



Power Coming In At Switch With 2 Lights In Series.



Work Let S Say That Switch 1 Is At The Bottom Of A Stairway And Switch.

Read More..

Flash Lights with HT2014L

Flash Lights with HT2014L




This scheme is almost the same with a flash light with LM3909. In this scheme only requires IC HT2014L as a leader, and a resistor and LED. For voltage here need ration power around 4.5 V. You can apply this series to a wider scale in comparing the use IC LM3909. For the scheme are below:

Read More..

Police Lights associate crystal rectifier Project

This circuit uses a 555 timer that is setup to each runn in associate Astable operative mode. This generates a nonstop output via Pin three within the type of a sq. wave. once the timers output changes to a high state this triggers the a cycle the 4017 4017 decade counter telling it to output consecutive sequent output high. The outputs of the 4017 ar connected to the LEDs turning them on and off.

Schematic


Parts List

1x - NE555 Bipolar Timer
1x - 4017 Decoded Decade
6x - 1N4148 Diode
1x - 1K Resistor (1/4W)
1x - 22K Resistor (1/4W)
2x - 4.7K Resistor (1/4W)
6x - 470 Resistor (1/4W)
1x - 2.2µF Electrolytic Capacitor (16V)
2x - BC547 NPN Transistor
2x - LED (Blue)
2x - LED (Red)
1x - 9V Voltage Battery 

 

Streampowers

Read More..